YUTRON – TURBOSTEAM
Spectrum-Product Company is the official representative of Yutron Company in Ukraine and provides direct contracts with the manufacturer without intermediaries.
The main advantage of Yutron is the turbine construction plant, which manufactures such equipment as: steam turbine, generators from 100kW to 20MW.
The site where steam turbines are assembled and repaired is located in Belarussia, namely, in its capital, Minsk.
The company employs specialists with extensive experience in the field of power engineering: designers, technologists, chief engineers, specialists in power engineering and process control, etc.
In total there are about 100 employees.
Since the beginning of the 90s, the employees of the company are working on the development and design of elements of steam backpressure and condensing steam turbines.
Spectrum-Product specialists have extensive experience in power engineering and directly in the field of turbo-generators, and will be able not only to advise you regarding this question, but also to help you choose the best option at the lowest cost.
We will perform the installation, commissioning and start-up of the turbine you have purchased in a qualitative manner.
Steam turbines 1MW – 20MW with backpressure, heating, condensing
Yutron produce steam turbines with the capacity from 1000 to 20000 kW of the following types:
- condensing (from 1 to 2 adjustable steam extractions for proccesing or heating needs of the plant) with capacity from 1000 kW to 20,000 kW are used to generate the maximum amount of electricity. After such turbine, the steam enters to the condenser in which, after cooling to the state of water by heat exchange with the circulating water of the cooling pond, the cooling tower is sent back through the pipeline back to the boiler.
- backpressure (also the steam extractions can take place) with capacity from 1000 kW to 20,000 kW are used for the simultaneous generation of electrical and thermal energy. But the main end product of such turbines is heat. All exhaust steam is used for proccesing or heating purposes. Electric power, developed by a turbo-unit with such steam turbine, depends on the needs of the production or the heating system.
Yutron steam turbine general specification:
|Capacity, kW||1000 – 20000|
|Steam pressure before the turbine inlet valve, MPa||1,3 – 4,9|
|Steam temperature before the turbine inlet valve, ° С||192 – 470|
|Extraction pressure, MPa(option)||0,2 – 0,981|
|Turbine steam outlet pressure, MPa||0,006 – 1,96|
|Steam consumption, t / hr||11 – 125|
|Gen-set type||Asynchronous / Synchronous|
|Voltage, V||6300/10500 (-5% + 10%)|
|ТGenerator cooling type||air, open loop|
|Life time, not less than years||25|
|Warranty period, months||18|